Home > evacuated tube solar hot water heater > air to water heater units installed system connection
air to water heater units installed system connection
2013-01-30 by seoer2

The installation of the unit:
    1, the installation of the air to the water heater and air conditioner outdoor unit installation requirements. Can be installed in the exterior walls, roof, balcony, on the ground. The outlet should avoid windward direction, and the wall distance ≥ 300mm
    2, the distance between the air to the water heater tank insulation is best not more than 2.5 meters.
    3, the distance between the air to the water heater and surrounded by walls or other obstructions can not be too small.
    4 mounted canopy protection unit to prevent wind and sun, should be taken to ensure unimpeded the endothermic heat dissipation of the unit heat exchanger.
home solar water heater     5, the water heater should be installed on a solid foundation and place, and make sure to install upright and fixed with anchor bolts.
    6, the control panel will not be installed in bathrooms and other high humidity places, in order to avoid moisture affect the normal work.
    Air to water heater tank insulation installation:
    1, tank insulation should be installed in a range of 2.5 meters from the host. With the heat pump installed in the outdoor, such as balconies, roofs, floors, and also installed in the interior. Storage tanks must sit ground installation, under the mat 10cm steppin solid foundation installations must withstand the weight of 500Kg, not hanging on the wall.
chinese solar water heater